Lower Dog Bone
June 29th, 2010, 5:10 PM
#1
CF Beginner
Thread Starter
Join Date: Jun 2010
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Lower Dog Bone
Hello all, this is my 1st post.
Just looking for some suggestions on this one.
This is a 2001 2.4L Cav.
I have just replaced my wifes lower motor mount due to hard shifting and WAY too much motor flex with a solid "dog bone" mount, and now at idle, the whole dash and steering wheel is insanely shaky.
I did read there would be vibrations, but I didn't expect it to be this bad.
When you turn on the A/C it is even worse.
Is there any way to up the idle a bit? Or does that need to be programatically done in the ECU?
We are idling at around 700RPM.
This car has 47k miles on it and runs great.
Any suggestions would be AWESOME.
Thanks,
Purple Z
Just looking for some suggestions on this one.
This is a 2001 2.4L Cav.
I have just replaced my wifes lower motor mount due to hard shifting and WAY too much motor flex with a solid "dog bone" mount, and now at idle, the whole dash and steering wheel is insanely shaky.
I did read there would be vibrations, but I didn't expect it to be this bad.
When you turn on the A/C it is even worse.
Is there any way to up the idle a bit? Or does that need to be programatically done in the ECU?
We are idling at around 700RPM.
This car has 47k miles on it and runs great.
Any suggestions would be AWESOME.
Thanks,
Purple Z
Thread
Thread Starter
Forum
Replies
Last Post
george3487
Silverado, Sierra & Fullsize Pick-ups
6
November 15th, 2013 10:06 AM
Zackman1995
Silverado, Sierra & Fullsize Pick-ups
5
February 5th, 2012 6:14 AM
ifwechoose
Silverado, Sierra & Fullsize Pick-ups
0
March 25th, 2010 2:37 PM
mikewaterskis
Silverado, Sierra & Fullsize Pick-ups
1
January 31st, 2007 1:12 PM
