help zo6 wheels
June 6th, 2009, 10:13 PM
#2
CF Junior Member
Join Date: May 2009
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
If the bolt pattern is the same at 4.75" and I'm not sure the Sierra is that size, but the S10 and S15 are, I still doubt they will fit due to backspacing problems. The only Vette wheels that would possibly fit your truck would probably be older ones like 1978 or so. Check your stock wheel backspacing then compare to the Corvette wheels. I'm pretty sure the eighties Vette wheels wouldn't fit either.
Last edited by a. palmer jr.; June 6th, 2009 at 10:18 PM.
June 7th, 2009, 2:04 AM
#3
CF Junior Member
Join Date: May 2009
Location: Middleville, MI
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Not a chance, your back spacing is going to be way off, and if your truck is 4x4 then there is know way, if your truck is 2x4, the Z06 rims are going to look dumb, if they even bolt up, with the Vettes'
the rear wheels are about 2.5" wider than the fronts, so rotating will never happen, unless you got them for free, with Brand New tires, then who cares!!!!!, .... I would check into buying a nice set of polished Alum. wheels for like $35 a piece, sorry man!
the rear wheels are about 2.5" wider than the fronts, so rotating will never happen, unless you got them for free, with Brand New tires, then who cares!!!!!, .... I would check into buying a nice set of polished Alum. wheels for like $35 a piece, sorry man!
Thread
Thread Starter
Forum
Replies
Last Post
gvette
OLD - PRIVATE For Sale / Trade Classifieds
0
January 24th, 2009 7:33 PM
