Chevrolet Forum - Chevy Enthusiasts Forums - looking for advice or opinions

Chevrolet Forum - Chevy Enthusiasts Forums (https://chevroletforum.com/forum/)

- Engine Building & Overhauling (https://chevroletforum.com/forum/engine-building-overhauling-43/)

- - looking for advice or opinions (https://chevroletforum.com/forum/engine-building-overhauling-43/looking-advice-opinions-67575/)

stever91

August 24th, 2014 11:41 PM

looking for advice or opinions

Building a small block 400 I have a set of new vortec heads and a set of 194's off from a 283 wondering which one would be best to use. I'm building the motor for an off road demolition derby car.

old dog

August 25th, 2014 7:05 AM

the casting's from the 283 will be more robust the chamber's will be smaller ,dependig on the piston's used better watch the compression the flow on the head's will not be very good .

All times are GMT -5. The time now is 11:39 AM.