looking for advice or opinions
August 24th, 2014, 11:41 PM
#1
CF Beginner
Thread Starter
Join Date: Aug 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
looking for advice or opinions
Building a small block 400 I have a set of new vortec heads and a set of 194's off from a 283 wondering which one would be best to use. I'm building the motor for an off road demolition derby car.
August 25th, 2014, 7:05 AM
#2
CF Veteran
Join Date: Dec 2007
Location:
Posts: 1,019
Likes: 0
Received 0 Likes
on
0 Posts
the casting's from the 283 will be more robust the chamber's will be smaller ,dependig on the piston's used better watch the compression the flow on the head's will not be very good .
Thread
Thread Starter
Forum
Replies
Last Post
Chevy_AllDay09
Engine Building & Overhauling
1
September 17th, 2014 8:18 AM
jeffgrace
Silverado & Fullsize Pick-ups
3
March 26th, 2014 1:53 PM
Veedo
Silverado & Fullsize Pick-ups
7
January 15th, 2014 7:09 AM
RoflCopter726
Silverado & Fullsize Pick-ups
0
March 14th, 2008 10:19 AM