1976 Chevy G30 wiring harness and turn signal assembly
November 29th, 2018, 2:34 PM
#1
CF Beginner
Thread Starter
Join Date: Nov 2018
Location: California
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
1976 Chevy G30 wiring harness and turn signal assembly
Hi, I have a 1976 Chevy G30 Vandura Tioga motorhome that needs:
a turn signal switch lever and assembly, and
the main Wiring harness that is in the engine compartment attached by a two part black piece that single bolts onto the firewall and out of which comes various wires.
It has a 350 5.7L 8 cylinder engine.
Would you have these parts, or could please direct me to where I can find them.
It is a Chevy/GMC G30 van base. Would you know what years are the same as to parts for the 1976 model?
Thank you very much!
a turn signal switch lever and assembly, and
the main Wiring harness that is in the engine compartment attached by a two part black piece that single bolts onto the firewall and out of which comes various wires.
It has a 350 5.7L 8 cylinder engine.
Would you have these parts, or could please direct me to where I can find them.
It is a Chevy/GMC G30 van base. Would you know what years are the same as to parts for the 1976 model?
Thank you very much!
November 29th, 2018, 5:39 PM
#3
I recommend visiting vanning.com
The folks there are more knowledgeable about the vintage vans.
The folks there are more knowledgeable about the vintage vans.
November 29th, 2018, 7:45 PM
#4
CF Pro Member
It cannot really be any different than a 1993, or any 1980, or... I had those years. Practically the same van with some revisions. I would think nearly all electrical from 1976 would be nearly identical. It would not surprise me if the van used the exact same firewall harness connectors as the Silverado or Suburban.