2000 Express 2500 check engine
August 21st, 2011, 11:18 AM
#1
CF Beginner
Thread Starter
Join Date: Aug 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2000 Express 2500 check engine
Can anyone give me any ideas on what to look for?
I have a problem with my 5.0 engine when cold.
No power at all I'm lucky to get out of my driveway, seems like when old ignition wires get wet.
I have replaced the wires, plugs, coil, and temp sensor.
I use scan tool and a code comes up (#4 misfire)
With the engine anylizer installed the short term fuel trim on bank 1 is +3.
Bank 2 is -30. I am quessing that the short term fuel trim on bank 2 is indicating a problem there.
When the engine warms up after 5-10 minutes it runs fine.
I have also heard a click (like a solenoid valve closing and then the engine runs fine)
thanks for any input
I have a problem with my 5.0 engine when cold.
No power at all I'm lucky to get out of my driveway, seems like when old ignition wires get wet.
I have replaced the wires, plugs, coil, and temp sensor.
I use scan tool and a code comes up (#4 misfire)
With the engine anylizer installed the short term fuel trim on bank 1 is +3.
Bank 2 is -30. I am quessing that the short term fuel trim on bank 2 is indicating a problem there.
When the engine warms up after 5-10 minutes it runs fine.
I have also heard a click (like a solenoid valve closing and then the engine runs fine)
thanks for any input
Thread
Thread Starter
Forum
Replies
Last Post
tkbpainting
Express, Savana & G-Series Vans
3
July 4th, 2012 12:38 PM
daycaremom
Express, Savana & G-Series Vans
7
April 22nd, 2012 11:46 PM
bake2don
Silverado, Sierra & Fullsize Pick-ups
9
October 23rd, 2008 10:04 PM
