G10/G20/G30 old sliding door repair, new part!
#1
G10/G20/G30 old sliding door repair, new part!
Hi everybody! I'm Andreas from Germany. I'm driving an A-Team Replica, not very common over here. I had a problem with my 1988 G20 sliding door. The door was not running well anymore. I found out the hanging door is a problem of a plastic slider, stabilizer that wasn't available as a spare part anymore. But all used parts I could find over here had the same problems. If you have the same problem I can offer this part also to you! It's great because it stabilizes the door again. I have about ten more parts and will order new ones if needed.
In 2020 I also made more parts like bushings and other wearing parts.
https://www.ebay.de/itm/145461421423
I'm a private person, no part dealer. If you need that part, you'll find it in the bay (keywords: GMC Vandura, G10/20/30 Schiebetür Ersatzteil, Stabilisator) or just email me please!
Regards! Andreas
It's the part for this slider. Please make sure it's the same slider you've got.
This is the stabilizing part. Made of high tec nylon. Great durability, made in Germany ;-).
That's the right slider from outside view.
In 2020 I also made more parts like bushings and other wearing parts.
https://www.ebay.de/itm/145461421423
I'm a private person, no part dealer. If you need that part, you'll find it in the bay (keywords: GMC Vandura, G10/20/30 Schiebetür Ersatzteil, Stabilisator) or just email me please!
Regards! Andreas
It's the part for this slider. Please make sure it's the same slider you've got.
This is the stabilizing part. Made of high tec nylon. Great durability, made in Germany ;-).
That's the right slider from outside view.
Last edited by Andreas G20; November 26th, 2023 at 1:55 AM. Reason: new parts
The following users liked this post:
Lisanne Bck (January 15th, 2021)
#3
you can find it there:
https://www.ebay.de/itm/144305121789
https://www.ebay.de/itm/144305121789
Last edited by Andreas G20; November 24th, 2021 at 4:35 PM. Reason: new link
#4
#5
Could you create one for my 1977 chevrolet? I live in NL
Hi everybody! I'm Andreas from Germany. I'm driving an A-Team Replica, not very common over here. I had a problem with my 1988 G20 sliding door. The door was not running well anymore. I found out the hanging door is a problem of a plastic slider, stabilizer that wasn't available as a spare part anymore. But all used parts I could find over here had the same problems. If you have the same problem I can offer this part also to you! It's great because it stabilizes the door again. I have about ten more parts and will order new ones if needed. Its about 30 Dollars incl. shipping from Germany.
I'm a private person, no part dealer. If you need that part, you'll find it in the bay oder just email me please!
Regards! Andreas
It's the part for this slider. Please make sure it's the same slider you've got.
This is the stabilizing part. Made of high tec nylon. Great durability, made in Germany ;-).
That's the right slider from outside view.
I'm a private person, no part dealer. If you need that part, you'll find it in the bay oder just email me please!
Regards! Andreas
It's the part for this slider. Please make sure it's the same slider you've got.
This is the stabilizing part. Made of high tec nylon. Great durability, made in Germany ;-).
That's the right slider from outside view.
#6
#7
Andreas, I know this is an older thread, but you have EXACTLY what I need...or at least DID. I was actually contemplating reverse-engineering the nylon block myself and having a shop make them, along with the cam levers on the slider that ALWAYS seem to be broken when I find one. Do you still have any of these parts available? Could you get more made? I know there are quite a few folks around my part of the state that would love to get their hands on some new parts....Please let me know if you can help me out. I live in California in the US. Thanks, Greg
Last edited by mountainmanjoe; March 21st, 2022 at 7:11 AM.
Trending Topics
#9
Also need some parts!
Hi Andreas,
I am also in need of some parts! Do you still make them?
<personal info removed. Please use the private message system. -mod>
Thank in advance!
Marco
I am also in need of some parts! Do you still make them?
<personal info removed. Please use the private message system. -mod>
Thank in advance!
Marco
Last edited by mountainmanjoe; March 21st, 2022 at 7:11 AM.
#10
Spring?
Does anyone, anywhere, know where to get the 2 torsion srings for the latch arms in the upper sliding door arm roller, They seem to be the same in all years of the G10 - G30 and the GMC G1500 - G350. They're pictured in the Post regarding the Nylon Guide Block.