special tools needed for 6.0 spark plug change?
#1
![Default](/forum/images/icons/icon1.gif)
this is a 2008 with the 6.0 and plugs/wires are due
are there any special tools that make this easier, especially in the more difficult to reach plugs?
and how often are you guys replacing coils on the 6.0?
this has 95,000 miles on it but 15 years old..
thanks!
are there any special tools that make this easier, especially in the more difficult to reach plugs?
and how often are you guys replacing coils on the 6.0?
this has 95,000 miles on it but 15 years old..
thanks!
Last edited by Expresscv; March 28th, 2023 at 12:12 PM.
#2
![Default](/forum/images/icons/icon1.gif)
replace the coils when they fail.
spark plug socket with a swivel or ujoint
good set of spark plug wire pullers.
put dielectric grease on the inside circle of the plug wire boot where it contacts the ceramic insulator
spark plug socket with a swivel or ujoint
good set of spark plug wire pullers.
put dielectric grease on the inside circle of the plug wire boot where it contacts the ceramic insulator
The following users liked this post:
Triaged (March 29th, 2023)
Thread
Thread Starter
Forum
Replies
Last Post
PastorK
Tahoe & Suburban
2
March 6th, 2010 6:55 PM