454 BBC information needed
October 10th, 2021, 2:05 PM
#1
CF Beginner
Thread Starter
Join Date: Oct 2021
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
454 BBC information needed
I have 2 454 BBC engines i would like some more information on and am having difficulty finding certain things out. Any information would help. I am trying to decide which motor would be better to Use for my blower motor.
The FIRST ENGINE is out of a 1990 GMC Sierra Vin #2GTGK39N5L1502021.
Casting engine on the head: 14092360
Engine ID number: T08185CH (the engine is still in the vehicle, and it was difficult to see so I’m 99% sure this is the number)
Based on the VIN I know:
1990, GMC K3500 1 Ton P/U, 4WD 8 cylinders N 7.4L TBI, OHV 454 CID
THE SECOND ENGINE INFORMATION IS AS FOLLOWS
454 Big Block Chevy with 049 Heads on it Casting # for heads is 353049 (it originally came with the peanut heads)
Mark IV
Engine Casting #14015445
Engine ID #T1203XXZ
On the driver side rear stamp: K13, 445, Hi PERF, Pass
I’d like information on the pistons, rods, crank, cam that came with it, as well as any other details/information on the performance of the engines.
The FIRST ENGINE is out of a 1990 GMC Sierra Vin #2GTGK39N5L1502021.
Casting engine on the head: 14092360
Engine ID number: T08185CH (the engine is still in the vehicle, and it was difficult to see so I’m 99% sure this is the number)
Based on the VIN I know:
1990, GMC K3500 1 Ton P/U, 4WD 8 cylinders N 7.4L TBI, OHV 454 CID
THE SECOND ENGINE INFORMATION IS AS FOLLOWS
454 Big Block Chevy with 049 Heads on it Casting # for heads is 353049 (it originally came with the peanut heads)
Mark IV
Engine Casting #14015445
Engine ID #T1203XXZ
On the driver side rear stamp: K13, 445, Hi PERF, Pass
I’d like information on the pistons, rods, crank, cam that came with it, as well as any other details/information on the performance of the engines.
October 13th, 2021, 6:26 AM
#2
CF Beginner
Join Date: Oct 2021
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I have 2 454 BBC engines i would like some more information on and am having difficulty finding certain things out. Any information would help. I am trying to decide which motor would be better to Use for my blower motor. Tutuapp9AppsShowbox
The FIRST ENGINE is out of a 1990 GMC Sierra Vin #2GTGK39N5L1502021.
Casting engine on the head: 14092360
Engine ID number: T08185CH (the engine is still in the vehicle, and it was difficult to see so I’m 99% sure this is the number)
Based on the VIN I know:
1990, GMC K3500 1 Ton P/U, 4WD 8 cylinders N 7.4L TBI, OHV 454 CID
THE SECOND ENGINE INFORMATION IS AS FOLLOWS
454 Big Block Chevy with 049 Heads on it Casting # for heads is 353049 (it originally came with the peanut heads)
Mark IV
Engine Casting #14015445
Engine ID #T1203XXZ
On the driver side rear stamp: K13, 445, Hi PERF, Pass
I’d like information on the pistons, rods, crank, cam that came with it, as well as any other details/information on the performance of the engines.
The FIRST ENGINE is out of a 1990 GMC Sierra Vin #2GTGK39N5L1502021.
Casting engine on the head: 14092360
Engine ID number: T08185CH (the engine is still in the vehicle, and it was difficult to see so I’m 99% sure this is the number)
Based on the VIN I know:
1990, GMC K3500 1 Ton P/U, 4WD 8 cylinders N 7.4L TBI, OHV 454 CID
THE SECOND ENGINE INFORMATION IS AS FOLLOWS
454 Big Block Chevy with 049 Heads on it Casting # for heads is 353049 (it originally came with the peanut heads)
Mark IV
Engine Casting #14015445
Engine ID #T1203XXZ
On the driver side rear stamp: K13, 445, Hi PERF, Pass
I’d like information on the pistons, rods, crank, cam that came with it, as well as any other details/information on the performance of the engines.
Last edited by markzober; October 13th, 2021 at 4:43 PM.
Thread
Thread Starter
Forum
Replies
Last Post