4x4 question: adding 4wd low to single gear transfer case Suburban
January 25th, 2018, 5:30 PM
#1
CF Beginner
Thread Starter
Join Date: Jan 2018
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
4x4 question: adding 4wd low to single speed transfer case Suburban
I recently came across a good deal on a 2012 Suburban LT 4x4......only problem is it only has 4wd high. I called my local Chevy dealer and they told me GM produced some Burbans/Tahoes circa 2010-2013 with only 4wd high (single speed transfer case) so people could tow these......it is not equipped with 4wd low.
Anyways, my question is: How would one add 4wd Low to this vehicle? What would need to be done mechanically/parts? Any aftermarket bolt on adaptors? Or would I have to drop the single speed and replace it with a two speed transfer case?
I know the smartest/best thing would be to sell it and buy one with 4wd hi/lo. I am just curious to what it would entail to add 4 low......?
Any thoughts or suggestions would be appreciated, Thanks!
Anyways, my question is: How would one add 4wd Low to this vehicle? What would need to be done mechanically/parts? Any aftermarket bolt on adaptors? Or would I have to drop the single speed and replace it with a two speed transfer case?
I know the smartest/best thing would be to sell it and buy one with 4wd hi/lo. I am just curious to what it would entail to add 4 low......?
Any thoughts or suggestions would be appreciated, Thanks!
Last edited by Schley Eldridge; January 26th, 2018 at 4:10 PM. Reason: Change title
