Exhaust Help
January 18th, 2011 | 9:48 AM
#1
Thread Starter
CF Beginner
Joined: Jan 2011
Posts: 2
Likes: 0
From: Novia Scotia
Exhaust Help
Hi,
I have 1988 Chevy silverado 1500 2 WD with a 305. I went too replace the donut gasket and needed to drill out one of the studs at the " y " pipe. I took off the pass side manifold for ease. When I went to install the manifold I found the bolt holes don't line up anymore. I've tryed bolting one end and than the other, nothing seems to work. Any help would be really great
THANKS Mike
I have 1988 Chevy silverado 1500 2 WD with a 305. I went too replace the donut gasket and needed to drill out one of the studs at the " y " pipe. I took off the pass side manifold for ease. When I went to install the manifold I found the bolt holes don't line up anymore. I've tryed bolting one end and than the other, nothing seems to work. Any help would be really great
THANKS Mike
Thread
Thread Starter
Forum
Replies
Last Post
coltsfanchris
Silverado, Sierra & Fullsize Pick-ups
2
February 19th, 2012 6:03 PM
chevvy2000
Silverado, Sierra & Fullsize Pick-ups
1
October 11th, 2006 2:39 PM
