For Sale: Vortec/Edelbrock TPI
November 10th, 2014, 7:06 PM
#1
CF Beginner
Thread Starter
Join Date: Aug 2011
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Vortec/Edelbrock TPI
Edelbrock HiFlow Vortec TPI base and runners with functioning egr valve and corvette EGR takeoff, fuel rails/fuel pressure regulator, Multec injectors (cores). Gasket matched and casting flash cleaned up- no major porting effort. Oem plenum ported. Comes with all vacuum ports and hei cover and vortec intake gaskets. Needs bolts. $645
X9 Ford/Bosch gen4 24lb injectors- barely used, modified for TPI fuel rails worked great at 44 psi with hot 355cid. USCAR connector pigtails included. 280-158-138, 7C3E-AB. $250
Edelbrock 1910 Q-Jet carb, 850cfm, Cliff Ruggles kit. $450
Milodon Diamond Stripper windage tray, SBC. $60
Upcoming package- Crower 3/8in x 1:6 Enduro rockers self aligning v. good condition, lightly used LS7 roller lifters, OEM vortec roller cam (excellant core for regrind) $350
X9 Ford/Bosch gen4 24lb injectors- barely used, modified for TPI fuel rails worked great at 44 psi with hot 355cid. USCAR connector pigtails included. 280-158-138, 7C3E-AB. $250
Edelbrock 1910 Q-Jet carb, 850cfm, Cliff Ruggles kit. $450
Milodon Diamond Stripper windage tray, SBC. $60
Upcoming package- Crower 3/8in x 1:6 Enduro rockers self aligning v. good condition, lightly used LS7 roller lifters, OEM vortec roller cam (excellant core for regrind) $350
Last edited by dfarr67; March 7th, 2015 at 5:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post
obehave8802
OLD - Private 'Wanted' Classifieds
0
February 18th, 2007 3:02 PM