1995 C1500 5.7L heat won't come out of vents, mode door malfunctioning
October 16th, 2017, 11:10 PM
#1
CF Beginner
Thread Starter
Join Date: Oct 2017
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
1995 C1500 5.7L heat won't come out of vents, mode door malfunctioning
I have a 1995 C1500 5.7L that won't blow heat (heater core is OK) and mode door is stuck blowing air through the dash.
Searched around a bit for troubleshooting but for some reason this model year's dash is different from all the forum postings I've been finding and the white plastic parts mentioned in said postings is not behind glove box and ash tray.
Looking for the quickest route to blend door so I can properly it open for a quick fix since it's getting colder.
Also looking for info on how to troubleshoot completely for when I get time to fix all the way. Pretty sure the ac control module is to blame but may discover the blend door is jammed if I can find how to get to it.
Searched around a bit for troubleshooting but for some reason this model year's dash is different from all the forum postings I've been finding and the white plastic parts mentioned in said postings is not behind glove box and ash tray.
Looking for the quickest route to blend door so I can properly it open for a quick fix since it's getting colder.
Also looking for info on how to troubleshoot completely for when I get time to fix all the way. Pretty sure the ac control module is to blame but may discover the blend door is jammed if I can find how to get to it.
October 17th, 2017, 1:00 AM
#2
CF Monarch
Does your C-1500 have electric controls outside the heater/AC box?