75 Chevy C10
#1
CF Beginner
Thread Starter
Join Date: Aug 2009
Location: Vancouver, BC
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
75 Chevy C10
So need to replace my turn signal indicator sometime this winter, and hoping to get some advice, or guidance to do so or a quick fix..
When I go to turn it on there is a sweet spot that it will turn my blinkers on.. right turns i have to hold it there and left turns it clicks and holds if you know what i mean.. Anyways thinking i will replace it over the winter and hoping to get some advice now so I'm not leaving it to the last minute..
Guessing I need to remove the steering wheel and then take off the column collar with the ignition and signal indicator out.. after that.. well I am going to play it by ear unless i get some advice, Thanks
When I go to turn it on there is a sweet spot that it will turn my blinkers on.. right turns i have to hold it there and left turns it clicks and holds if you know what i mean.. Anyways thinking i will replace it over the winter and hoping to get some advice now so I'm not leaving it to the last minute..
Guessing I need to remove the steering wheel and then take off the column collar with the ignition and signal indicator out.. after that.. well I am going to play it by ear unless i get some advice, Thanks
#2
signal
i believe you will need a loc plate snap ring remover ,cal van makes them every body sells them .hers one http://www.sjdiscounttools.com/kd2414.html
Thread
Thread Starter
Forum
Replies
Last Post
1978 Chevrolet C10 half ton horn contact/ horn wiringI have a 1978 Chevrolet C10 that it's horn does
isaac_22
Silverado, Sierra & Fullsize Pick-ups
2
December 26th, 2007 9:23 PM