For Sale: or trade: NASCAR Chevy R07 Cylinder head, complete
#1
or trade: NASCAR Chevy R07 Cylinder head, complete
Chevy R07 Aluminum Heads will fit on a small block. They've got about $10,000 in machine work and parts and labor, over $1500 in the valve train alone, they cost about $2600 each direct from GM. Which leaves about $3300 in CNC machine work. These are the cylinder heads that were purpose built by GM for NASCAR Racing.
Titanium Intake valves : 2.180 head x 5.980 long x 6mm stem weighs 73 grams
Titanium Exhaust valves : 1.6325 head x 5.735 long x 7 mm stem weighs 63 grams
These come with valve seat locators, polished PSI valve springs & mini top lock titanium retainers.
Approx Spring Rates: 200 lbs @ 2.00 in, 575 lbs @ 1.250 in
They have been fully CNC machined and ported, Intake port: 1.730" x 1.985"
They flow upwards of 375CFM and can handle up to right around 12,000rpm.
I acquired these in a trade and the data above is what the previous owner gave me.
I live in Golden, Colorado and would prefer a local trade or sale around the Denver area.
$3500 sale or trade.
Contact via PM here or email me at jorjohnso@gmail.com
Titanium Intake valves : 2.180 head x 5.980 long x 6mm stem weighs 73 grams
Titanium Exhaust valves : 1.6325 head x 5.735 long x 7 mm stem weighs 63 grams
These come with valve seat locators, polished PSI valve springs & mini top lock titanium retainers.
Approx Spring Rates: 200 lbs @ 2.00 in, 575 lbs @ 1.250 in
They have been fully CNC machined and ported, Intake port: 1.730" x 1.985"
They flow upwards of 375CFM and can handle up to right around 12,000rpm.
I acquired these in a trade and the data above is what the previous owner gave me.
I live in Golden, Colorado and would prefer a local trade or sale around the Denver area.
$3500 sale or trade.
Contact via PM here or email me at jorjohnso@gmail.com
Last edited by MrBlah; February 7th, 2012 at 3:54 PM.
#3
These will make for an amazing build! I hope you don't have to hold on to them for too long, but hopefully the post here will help move them along!
Thread
Thread Starter
Forum
Replies
Last Post
Chevrolet Forum News
News, Concepts, SEMA
0
February 20th, 2013 12:38 PM
Chevrolet Forum News
News, Concepts, SEMA
0
February 8th, 2013 11:48 AM
DOBERDEWD
Tahoe & Suburban
3
December 11th, 2011 11:35 PM