1993 silverado angel eye "halo" headlights?
Thread Starter
CF Beginner
Joined: Feb 2009
Posts: 19
Likes: 0
1993 silverado angel eye "halo" headlights?
Ok i was wondering what i needed to do to install my new headlights. On other cars i know you have to tie in to the brake lights for the angel eye to work. Am i going to have to do so to my truck as well? If so how? Or will they just be plug in and your done?
CF Monarch
Joined: Jul 2007
Posts: 5,891
Likes: 29
From: Princeton, NC, USA
You need to tie into your parking lights, not your brake lights.
The headlights themselves will just plug in, but the backlight and the halos need to be tapped into the parking light. It will be the blue and black wires.
The headlights themselves will just plug in, but the backlight and the halos need to be tapped into the parking light. It will be the blue and black wires.
CF Junior Member
Joined: Nov 2008
Posts: 64
Likes: 0
I just installed mine today on my 2002. You need to splice them into your parking lights (which is your turn signal bulb, atleast it was on mine should be on yours too)/ Like stated above pull back the plastic/rubber covering over your wires that lead to that bulb. My colors were Blue/Brown (and another color) the blue was the turn signal, the brown was the parking light. Goodluck! The kind I bought didnt fit right in, it took some moving around to get them to go in right. Also we had to take the Adjustment rods out of the OEM lights and replace them on the new lights because the ones that came with it, were ****! So that was the only thing that too the longest! They are badass tho!
Thread Starter
CF Beginner
Joined: Feb 2009
Posts: 19
Likes: 0
Ok well i'm going to try to wire them together today and i'll post some pics when i get done. I finally got my mesh grill and L.E.D. tail lights on now i just have to finish up the rings on the halos =] Thx for the advice!!! CHEVY > FORD
Thread
Thread Starter
Forum
Replies
Last Post
mrhector85
Silverado, Sierra & Fullsize Pick-ups
0
Mar 1, 2009 4:45 PM
