August 6th, 2015, 2:18 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
- Chevrolet Silverado GMT800, GMT900, and K2XX How to Install Remote Start Alarm
Step by step instructions for do-it-yourself repairs
Detailed Install of Viper 5901 Remote Start/Alarm on 09 Silverado
December 28th, 2011, 11:46 AM
#32
CF Beginner
Join Date: Dec 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Remote Start Error
First off let me say hello as I am new to the forum. I just finished all the wiring for the install on my 2010 Silverado WT. Everything was going smooth until the remote start would not work and give me a Remote Start Error message on the remote with no flashes. I done the install with the dlpk bypass. I tested the alarm and everything works fine with that, but I just cant figure out why it will not even attempt to start. I have went through the instructions numerous times and checked the wiring to assure it is correct. If anyone has any idea what could be causing this error please help.
December 29th, 2011, 6:45 AM
#33
CF Active Member
Hello fellas,
I would hate to ask such a dumb question but where can I get a dlpk?? I am trying to install the 5901 on ky 04 silverado.. thanks in advance..
I would hate to ask such a dumb question but where can I get a dlpk?? I am trying to install the 5901 on ky 04 silverado.. thanks in advance..
December 29th, 2011, 9:02 AM
#34
CF Beginner
Join Date: Dec 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Blaze, I ordered mine from the link given at the top of thread http://www.caraudio-caralarms.com/. They provided great service and had the bypass at my door in 3 days.
December 29th, 2011, 9:07 AM
#35
CF Beginner
Join Date: Dec 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thank you jcjoines for a great post. It really made for a easy install. After a couple more hours of going over everything I got all of the system working. Was just a simple mistake I made while programming the unit.
December 29th, 2011, 4:44 PM
#38
CF Beginner
Join Date: Dec 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys,
Just want to start off by saying that this has been one of the most helpful forums on installing your own viper alarm system. God Job!!
I just purchased a 2012 Silverado 2500HD and the local shop in town wants $799 to install the Viper 5901. I think I'm going to tackle this on my own.
The site you provided Car Alarms Ohio Columbus OH Remote Car Starters Replacement Car Alarm Remotes Bypass Modules - Remote Start Experts states that the DLPKGM has been discontinued and the DLPK works on models up to 2010. XpressKit.com shows that the DBALL should work for my 2012 vehicle. I was thinking of ordering the DBALL and the RFLCHGM(Rf loop; to address the dead battery issue.). Before I ordered anything I wanted to check you you guys if there is any other issues or concerns I should be aware of?
Thanks!
Just want to start off by saying that this has been one of the most helpful forums on installing your own viper alarm system. God Job!!
I just purchased a 2012 Silverado 2500HD and the local shop in town wants $799 to install the Viper 5901. I think I'm going to tackle this on my own.
The site you provided Car Alarms Ohio Columbus OH Remote Car Starters Replacement Car Alarm Remotes Bypass Modules - Remote Start Experts states that the DLPKGM has been discontinued and the DLPK works on models up to 2010. XpressKit.com shows that the DBALL should work for my 2012 vehicle. I was thinking of ordering the DBALL and the RFLCHGM(Rf loop; to address the dead battery issue.). Before I ordered anything I wanted to check you you guys if there is any other issues or concerns I should be aware of?
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Pwgsx
Silverado, Sierra & Fullsize Pick-ups
3
January 17th, 2013 5:24 PM
20Silverado01
Silverado, Sierra & Fullsize Pick-ups
0
January 6th, 2010 3:41 PM
biglg
Tahoe & Suburban
29
September 23rd, 2008 7:54 PM
