HELP!! Wiper Stalk Issue
February 13th, 2015, 8:21 AM
#1
CF Beginner
Thread Starter
Join Date: Feb 2015
Location: Moncton, New Brunswick
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
HELP!! Wiper Stalk Issue
Hello All,
I am new to this forum so please excuse any mistakes...
Anyway i have a 1990 Chev Silverado, reg cab stepside, manual. It has the 5.7L 350 in it.
I recently replaced the wiper stalk in it as i found the selector switch on the stalk would just spin from delay to high and not engage/click at any notch.
After installing the new stalk i have the same problem it does not engage and the wipers are stuck on high. The only way to shut them off is to unplug the switch under the hood. What is the issue and how can i get the selector switch on the stalk to start engaging?
Any help would be greatly appreciated.
Truck pics below.
I am new to this forum so please excuse any mistakes...
Anyway i have a 1990 Chev Silverado, reg cab stepside, manual. It has the 5.7L 350 in it.
I recently replaced the wiper stalk in it as i found the selector switch on the stalk would just spin from delay to high and not engage/click at any notch.
After installing the new stalk i have the same problem it does not engage and the wipers are stuck on high. The only way to shut them off is to unplug the switch under the hood. What is the issue and how can i get the selector switch on the stalk to start engaging?
Any help would be greatly appreciated.
Truck pics below.
Thread
Thread Starter
Forum
Replies
Last Post
ruley73
Equinox & Terrain
21
September 15th, 2017 8:11 AM
junkie2100
Silverado, Sierra & Fullsize Pick-ups
3
June 19th, 2015 2:17 PM
Hevyman
Silverado, Sierra & Fullsize Pick-ups
0
December 3rd, 2013 3:11 PM
aubiexx
Tahoe & Suburban
8
January 8th, 2011 6:10 AM