07 Bulbs
September 5th, 2006, 10:41 PM
#1
CF Beginner
Thread Starter
Join Date: Aug 2006
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
07 Bulbs
I need some advice on how to change all the bulbs on my Tahoe. I have the bulbs already, so all I need is some help on how to access the factory bulbs. I tried leaving the assemblies in and accessing it from the back, but I can't access the DRLs, parking lights or the high beams. I tried unbolting the assemblies but they only loosen up and don't come out. I don't want to rip the headlight assembly out if there's some hidden bolts somewhere or a trick as how to get them out. I just want to make sure everything goes back in place correctly when I'm done. I really don't want to have loose this and extra that when it comes to my new truck. Thanks in advance for anyone's/everyone's help.
September 6th, 2006, 11:34 PM
#2
CF Beginner
Join Date: Sep 2006
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: 07 Bulbs
Hi,
I'm new to this forum but have been on the Edmunds site over the past 30days. There was a bunch of discussion from some guys about the HID light install.
The link to the forum is http://townhall-talk.edmunds.com/WebX/.ef9e1cf/1813
You can do a search on the "2007 Chevrolet Tahoe/GMC Yukon" board and will come across some good info.
I'm new to this forum but have been on the Edmunds site over the past 30days. There was a bunch of discussion from some guys about the HID light install.
The link to the forum is http://townhall-talk.edmunds.com/WebX/.ef9e1cf/1813
You can do a search on the "2007 Chevrolet Tahoe/GMC Yukon" board and will come across some good info.
Thread
Thread Starter
Forum
Replies
Last Post