2017 Burb Rear Fuse Block - Constant On?
#1
CF Beginner
Thread Starter
![Default](/forum/images/icons/icon1.gif)
Hi
New member here...hope someone can help!
Installed a rear facing Dashcam in my 2017 Burb...wired w/fusetap to rear fuseblock...But find that ALL fuses & open ports on this block are ‘constant on’...none appear to be ‘switched’ w/ignition on. So dashcam stays on all the time, which is not desired.
Any ideas to remedy short of tapping another switched feed wire or running line to front left fuseblock?
New member here...hope someone can help!
Installed a rear facing Dashcam in my 2017 Burb...wired w/fusetap to rear fuseblock...But find that ALL fuses & open ports on this block are ‘constant on’...none appear to be ‘switched’ w/ignition on. So dashcam stays on all the time, which is not desired.
Any ideas to remedy short of tapping another switched feed wire or running line to front left fuseblock?
Thread
Thread Starter
Forum
Replies
Last Post
IB Jason
Newsletter Archive
0
February 12th, 2018 3:48 PM
IB Cristina
Newsletter Archive
0
December 5th, 2017 9:32 PM