Fan doesent blow on step 1 and 2
November 5th, 2007, 2:17 PM
#1
CF Beginner
Thread Starter
Join Date: Nov 2007
Location: Sweden
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Fan doesent blow on step 1 and 2
My fan wont blow on 1 and 2 step. 3,4 and 5 works. Thought it was the a/c panel so i replaced it with a brand new one. But still i got the same problem.
Someone?
Someone?
November 5th, 2007, 3:08 PM
#2
RE: Fan doesent blow on step 1 and 2
Check the blower motor resistor and also check that the blower wire harness hasn't rubbed through at the right side instrument panel lower support bracket near the fuse block.
Check the fuses under hood and IP.
There is also a blower motor control module that could be faulty.
Check the fuses under hood and IP.
There is also a blower motor control module that could be faulty.
Thread
Thread Starter
Forum
Replies
Last Post
ActiveMonkey
Silverado, Sierra & Fullsize Pick-ups
21
June 26th, 2015 11:24 AM
ActiveMonkey
Silverado DIY and Useful Threads
0
May 27th, 2009 7:50 PM
