oil pressure gauge mystery
November 29th, 2014, 5:31 PM
#1
CF Beginner
Thread Starter
Join Date: Nov 2014
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
oil pressure gauge mystery
My oil pressure gauge would shoot up to 80psi when I stepped on the gas, then drop back down to normal (around 30psi) when at idle. I then replaced the oil pressure sending unit. Now when I start the van, the gauge goes to about 10psi and stays there, even when I accelerate. It does not move at all. I have changed the oil and filter. Not sure how to check the gauge itself, but it does move from 0 to 80 psi. Thanks for any ideas.
Last edited by privatecarp; November 29th, 2014 at 6:30 PM. Reason: mispelling
Thread
Thread Starter
Forum
Replies
Last Post
Steelman512
Tahoe & Suburban
4
June 8th, 2023 2:51 PM
not_a_car_dude
Tahoe & Suburban
4
September 15th, 2013 7:41 PM