I picked this tranny up a few years back and I知 finally putting it in the truck. So I got a shift kit with it, so I kinda smelled trouble lol. I opened it up and it was clean. Minor sludge on the magnet. I removed the valve body and 1-2 3-4 accumulator. I noticed the spring was broke and the separator is almost worn through. So I知 ordering the valves, springs and separator. I値l change or clean the screens as well. Is there anything else I should look at replacing without pulling the guts out. I知 pretty limited in my Trans expertise. But I知 dumb and have a camera so I値l try anything lol. Thanks in advance.