Blown ECMB Fuse
August 4th, 2018, 6:08 PM
#1
CF Beginner
Thread Starter
Join Date: Aug 2018
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Blown ECMB Fuse
Hey all!
Recently my 97 Silverado 5.7l Vortec has had some issues. My fuel pump won't run and I've blown through 4 ECMB 20 amp fuses trying to find the issue. I figure it's a wiring issue, but I can't seem to find anything wrong. I can't find a ground wire other than the braided one from the block to the frame which I cleaned up. Could I just have a dead fuel pump?
Any help greatly appreciated!
Recently my 97 Silverado 5.7l Vortec has had some issues. My fuel pump won't run and I've blown through 4 ECMB 20 amp fuses trying to find the issue. I figure it's a wiring issue, but I can't seem to find anything wrong. I can't find a ground wire other than the braided one from the block to the frame which I cleaned up. Could I just have a dead fuel pump?
Any help greatly appreciated!
August 7th, 2018, 11:57 PM
#3
CF Beginner
Thread Starter
Join Date: Aug 2018
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Tried
Replaced fuel pump - died after 5 miles. ECM-B fuse was intact when it died but blew when I tried turned the key to the "On" position. Fuel pump no longer running. Short somewhere?