I just blought a 13 chevy Silverado. When i test drove it the blower motor worked fine.On the way home it quit. Ive replaced the 4 speed switch panel, the resister by the motor, ( tried two) And checked all the fuses. Im getting fire to the resister but not past it. To minimize cost i thought it would be a good idea to check here to see if anyone else has been through this. I also tested the blower motor itself to make sure it was working. Ive been told it could be the body control module. What do you think?

 

any luck ???? i have the same issue

 

Welcome from Florida. You stated that you are getting power to the resistor but not out of it. Try another resistor as good ones have been known to be bad. How did you test the blower motor?