2007 - 2013 (GMT900) Section for all discussion related to the 2007-2013 Chevrolet and GMC trucks.

Service TCS/Stabilitrak with no codes or loss of power

Old May 15, 2017 | 10:05 AM
  #1  
2011silveradolt's Avatar
Thread Starter
CF Beginner
 
Joined: May 2017
Posts: 7
Likes: 0
Default Service TCS/Stabilitrak with no codes or loss of power

I have a 2011 Silverado Lt 4X4 with 90,000 miles on it. Last Friday I had the transmission, both differentials and the transfer case serviced. On Monday I was on my way home from work driving straight at about 25 MPH and I got the dreaded chime with flashing SERVICE TRACTION CONTROL, SERVICE STABILITRAK. I did not have a reduce engine power warning. So I continued to drive it back to the service shop and had them check the fluids. I verified with them all was good with the fluid levels. I had no hard shifting and no lack of power during the drive. I had this light once before after installing my lift kit and it was because of the connector at the front transfer case. So I then decided to shut my truck off and completely remove the connector and then reinstall it. I started it up and boom the warning were gone. So I thought okay we are good, well nope. A few days later around the 100 mile mark it happened again so I pulled the connector and put it back and all was good. Can someone tell me what is going on with this?
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 9:33 AM.