NeverestSherpa

Anyone that can identify the resistor type for either of the twin banks that have five (5) each adjacent to the plug-in?

i have my cluster apart to replace the Tach stepper motor and diagnose an intermittent issue (often after a bump) where the cluster loses track of Driver 1 and displays Unknown Driver; various dash lights illuminate, needles drop to nothing, etc. Then for no explainable reason, it will reacquire Driver 1 and everything returns to normal.


Not my board but one similar. Referring to the five resistors immediately adjacent to the plug-in (large white square).

When examining the board, I noticed one of my resistors on the bank left of the plug-in is missing and subsequently suspect but unfortunately, no identifier.

Thanks...

oldchevy

Sounds like a bad connection or possibly a cracked solder joint somewhere on the board. Did this just start doing this?