v6 camaro 6 speed?
May 7th, 2010, 11:16 AM
#1
CF Junior Member
Thread Starter
Join Date: Nov 2009
Location: Ft. Carson, CO
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
v6 camaro 6 speed?
ok been workin on an 01 camaro for the past couple of years. its a v6 and i want to keep it a v6. want to do some performance up grades just for a fun car. questions are is there a 6 speed manual tranny tyhat will bolt up and what would be a good gear ratio for the axle. and any other thoughts on what could be done to the motor.
May 12th, 2010, 9:46 PM
#2
CF Active Member
Join Date: Feb 2010
Location: texas
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Check lakewood they make alot of aftermaket bellhousings, id put the t-56 in it and if the stock gears are decent maybe around 3.42 or higher(numerically) id keep em. Is that year v6 a 3.4 or 3.8
July 28th, 2010, 8:29 PM
#5
CF Beginner
Join Date: Jul 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Is it possible?yes.1 person that is known did it with a t-56 with a custom bellhousing.Total cost was right around 4k.If your serious about your 01 3.8 pm me and i can give you a couple of v6 enthusist sites with some absolute monsters of cars to give you some ideas of what this little 3.8 can do with time money and a little know how.
Rob
Rob
Thread
Thread Starter
Forum
Replies
Last Post
captain177
Silverado & Fullsize Pick-ups
2
April 8th, 2021 1:34 AM
ericnottelin
Silverado & Fullsize Pick-ups
1
August 6th, 2012 9:09 PM
5:00 PM
Express & G-Series Vans
0
January 7th, 2012 11:38 AM
