I have a 2004 cavalier and I have a big smelly hunting dog that comes with me in my car and I wanted to put in some seat covers so that the smell goes onto them and not into my car. So..I have some seat covers and in order to install them I need to take the head rests off.I can't seem to get them off.I pulled them up but they get to a certain point and they wont go any further. I tried putting something down (a hair pin)the same hole that the metal head rest bars go into but that didn't work.

I was also considering taking the back seats rightout so my dog would have a big flat area at the back. Iread on another forum that there are some clips somewhere but I searched everywhere and could not find anything.

Any help on either of these two issues would be greatly appreciated.

 

I was just reading through the forum and most of the topics are performance type questions. My apologies if these types of questions aren't meant for the forum.

 

should be a little tab right at the base of the headrest push it to the right or pull it cant remember should release the headrest, for removing the seat, I cant remember, I think you just have to push down and pull forward on the bottom nd it pops out, I dont think it is bolted in even.....

 

I can't find it. I had a good feel around under the material and everything and I couldn't find any sort of button or latch to release the head rests.