firewall replacement
December 10th, 2017, 5:49 PM
#1
CF Beginner
Thread Starter
Join Date: Dec 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
firewall replacement
replacing complete firewall at a pillars to floor pan. Any advise where to cut a pillar (high or low or in the middle ). Rockers are sleeved but I cant figure out if I sleeve the pillar how to attach the firewall by sliding the rocker and pillar together ,as the a pillar being at 45 degrees to the rocker angle it seems that it will be tough to slide together or do I not sleeve the a pillar,. any help would be appreciated
thanks jim
thanks jim
