amp install to factory radio
Banned
Joined: Jan 2008
Posts: 2,541
Likes: 14
RE: amp install to factory radio
sorry for the late replay, was out of country.....hope your still coming around the forums.
There are 2 ways you can do the amp install. Depending on the configuration of the amp, will tell you the easiest way to do it.
If the amp has a high level audio input, then the easiest way to install the amp, would be to run 2 sets of speaker leads to each door. 1 input, 1 output.
The other way would involve buying 2 line level converters and RCA's. This would be easiest at the radio. Install the line level converter into the speaker leads, then run RCA's to the amp, then run new speaker leads to each speaker
There are 2 ways you can do the amp install. Depending on the configuration of the amp, will tell you the easiest way to do it.
If the amp has a high level audio input, then the easiest way to install the amp, would be to run 2 sets of speaker leads to each door. 1 input, 1 output.
The other way would involve buying 2 line level converters and RCA's. This would be easiest at the radio. Install the line level converter into the speaker leads, then run RCA's to the amp, then run new speaker leads to each speaker
Thread
Thread Starter
Forum
Replies
Last Post
hpshooter
Express, Savana & G-Series Vans
9
Jul 24, 2013 11:27 PM
thehighclass
Silverado, Sierra & Fullsize Pick-ups
2
Jan 17, 2011 9:50 AM
adamant
Silverado, Sierra & Fullsize Pick-ups
1
Feb 15, 2009 8:49 AM
