Up gradeing to a H.O.350,need some advice
January 30th, 2010, 12:00 AM
#1
Up gradeing to a H.O.350,need some advice
I want to up grade the factory 350 in my 89 GMC van to a GM H.O. 350 "crate" engine.
I would really like to run the factory TBI
This engine has 9 to1compression and a 435/.460 lift 212/222 duration cam.
This is a daily driver van.I am looking for good light to light performance.i am also planning on pulling a car trailer with a 5,000 pound load (a 69chevy van) a little farther down the road with this van.
What will it take to get the TBI and the puter to play nice with this engine?
Thanks in advance for any help.........
..........Wookee
I would really like to run the factory TBI
This engine has 9 to1compression and a 435/.460 lift 212/222 duration cam.
This is a daily driver van.I am looking for good light to light performance.i am also planning on pulling a car trailer with a 5,000 pound load (a 69chevy van) a little farther down the road with this van.
What will it take to get the TBI and the puter to play nice with this engine?
Thanks in advance for any help.........
..........Wookee
Thread
Thread Starter
Forum
Replies
Last Post
vimagine
Tahoe & Suburban
3
April 16th, 2007 7:00 PM
cjb
Silverado & Fullsize Pick-ups
4
July 29th, 2006 4:00 PM
