427 head advice
#1
427 head advice
debating what do with my bbc 427.
It drives ok but very tame. Want more toruq/hp for solely street use.
Before I change the cam ( xe262 -218.224@50 with 510 lift) want to decide on what heads.
On now are chevy iron heads listed as 396/265hp and 427truck.225 intake runners.2.06/1.72 valves.Never cc'd so either 112 or 122cc depending on which books you look at giving either 8.5:1 or 9:5:1 with my pistons.
I have found some very good condition 215 heads.Theyve been polished and ported , have 260cc intake runners and 104cc chambers giving 10.25:1.Im in the uk and fuel here is 97 octane so ok. Have the same 2.06/1.72 valves.
Will using these really wake up the engine ( all other things being the same) . I would prefer new heads but theyre simply too costly once shipped here.
thanks
It drives ok but very tame. Want more toruq/hp for solely street use.
Before I change the cam ( xe262 -218.224@50 with 510 lift) want to decide on what heads.
On now are chevy iron heads listed as 396/265hp and 427truck.225 intake runners.2.06/1.72 valves.Never cc'd so either 112 or 122cc depending on which books you look at giving either 8.5:1 or 9:5:1 with my pistons.
I have found some very good condition 215 heads.Theyve been polished and ported , have 260cc intake runners and 104cc chambers giving 10.25:1.Im in the uk and fuel here is 97 octane so ok. Have the same 2.06/1.72 valves.
Will using these really wake up the engine ( all other things being the same) . I would prefer new heads but theyre simply too costly once shipped here.
thanks
#2
will probably go to Hyd roller lunati 221/229 @50 575 lift when I do this. performer intake. Have 4 speed stick , holley 750 vac ends. headers.Rear end 3.08 but may go to 3.55 once all else is done.
Thread
Thread Starter
Forum
Replies
Last Post
DOBERDEWD
Tahoe & Suburban
3
December 11th, 2011 11:35 PM
terry@autoquest
OLD - PRIVATE For Sale / Trade Classifieds
0
June 11th, 2010 1:55 PM
theblacktopbandit
Engine Building & Overhauling
1
March 5th, 2007 2:03 AM