Destroking a 350
January 28th, 2012, 4:32 PM
#1
New User
Awaiting E-mail Confirmation
Awaiting E-mail Confirmation
Thread Starter
Join Date: Jan 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Destroking a 350
I need to build a motor that conforms to rules allowing a 283, 302, and 305. I currently have am running a 305 which is not putting out the power needed. I have a 350 4 bolt main and a 262 motor to spare. I was considering putting the 262 crank into the 350 block essentially making a 311 (4"x3.1"). To reach the deck height I was going to run 6" rods with 383 pistons that have a pin height of 1.425" . With this combo ( if i calculated right) would put me .050" under the deck height of 9.025. Would this be a possible combination to build to conform to my rules? Also, would it be a good high rpm motor that would make more hp than a 305. Thanks!
Last edited by jtb0322; January 28th, 2012 at 4:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post
5.0stang
Silverado & Fullsize Pick-ups
3
June 16th, 2022 7:46 AM
computerdude14
Silverado & Fullsize Pick-ups
5
January 8th, 2013 3:33 PM
shawnmid
OLD - PRIVATE For Sale / Trade Classifieds
0
August 4th, 2010 1:19 AM
shawnmid
OLD - PRIVATE For Sale / Trade Classifieds
1
May 22nd, 2009 7:29 AM
