6.0 oil pan gasket replacement
October 24th, 2019, 9:46 PM
#1
CF Active Member
Thread Starter
6.0 oil pan gasket replacement
In the near future I am going to replace the oil pan gasket and oil cooler gasket on m 2004 Chevy Express 3500 with the 6.0. Would it be possible for somebody to post some photos of the instructions found in the factory manual? The oil pan ties into the transmission from what I can tell so I would like to confirm how they are bolted together.
Here's a primer on what I need to do. Hopefully the van is set up so that removal of the cross member is not required.
Cheers, Steve
Here's a primer on what I need to do. Hopefully the van is set up so that removal of the cross member is not required.
Cheers, Steve
October 24th, 2019, 11:45 PM
#2
it won't allow me to attach. PM me your email.
Last edited by mountainmanjoe; October 24th, 2019 at 11:47 PM.
October 27th, 2019, 11:16 AM
#4
CF Active Member
Thread Starter
I did some investigating yesterday. It is getting pretty bad.
Feel free to subscribe to my channel. My goal is to get about 500 subscribers so that I can work with Amazon.
Cheers, Steve
Feel free to subscribe to my channel. My goal is to get about 500 subscribers so that I can work with Amazon.
Cheers, Steve
Thread
Thread Starter
Forum
Replies
Last Post