'95 G20 Conversion -need AC help
April 8th, 2010, 4:12 PM
#1
CF Beginner
Thread Starter
Join Date: Apr 2010
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
'95 G20 Conversion -need AC help
Hi All, I'm new here and want to say thanks for any help.
My 95 G20 Conversion has just had a new AC compressor and return line (front and rear AC). Prior to repair, on acceleration, the AC would barely come out the the vents and lose coolness. When I let off the throttle, AC blows cold and strong.
It still have these symptoms after repair. My best guess is a vacuum leak, bad line or regulator which seems to redirect the air-flow when the vacuum pull is low .
Anyone have any thoughts or similar experience/solution?
Thanks much,
Curt
My 95 G20 Conversion has just had a new AC compressor and return line (front and rear AC). Prior to repair, on acceleration, the AC would barely come out the the vents and lose coolness. When I let off the throttle, AC blows cold and strong.
It still have these symptoms after repair. My best guess is a vacuum leak, bad line or regulator which seems to redirect the air-flow when the vacuum pull is low .
Anyone have any thoughts or similar experience/solution?
Thanks much,
Curt
Last edited by curtislt; April 8th, 2010 at 4:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
gawy
Express, Savana & G-Series Vans
2
September 8th, 2020 11:05 PM
berekhhnd
Express, Savana & G-Series Vans
8
November 24th, 2016 3:07 PM
UKG20dude
Express, Savana & G-Series Vans
0
January 30th, 2010 5:25 PM
Snotrocket
OLD - Private 'Wanted' Classifieds
0
September 25th, 2009 6:57 PM
