'95 G20 Conversion -need AC help
Thread Starter
CF Beginner
Joined: Apr 2010
Posts: 3
Likes: 0
'95 G20 Conversion -need AC help
Hi All, I'm new here and want to say thanks for any help.
My 95 G20 Conversion has just had a new AC compressor and return line (front and rear AC). Prior to repair, on acceleration, the AC would barely come out the the vents and lose coolness. When I let off the throttle, AC blows cold and strong.
It still have these symptoms after repair. My best guess is a vacuum leak, bad line or regulator which seems to redirect the air-flow when the vacuum pull is low .
Anyone have any thoughts or similar experience/solution?
Thanks much,
Curt
My 95 G20 Conversion has just had a new AC compressor and return line (front and rear AC). Prior to repair, on acceleration, the AC would barely come out the the vents and lose coolness. When I let off the throttle, AC blows cold and strong.
It still have these symptoms after repair. My best guess is a vacuum leak, bad line or regulator which seems to redirect the air-flow when the vacuum pull is low .
Anyone have any thoughts or similar experience/solution?
Thanks much,
Curt
Last edited by curtislt; Apr 8, 2010 at 4:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
gawy
Express, Savana & G-Series Vans
2
Sep 8, 2020 11:05 PM
berekhhnd
Express, Savana & G-Series Vans
8
Nov 24, 2016 3:07 PM
Snotrocket
OLD - Private 'Wanted' Classifieds
0
Sep 25, 2009 6:57 PM
