Hi,



I am building a sort of frankenstein van, and I have obtained what I thought was a full harness for it, however, I am not seeing any connectors for the, EGR solenoid (5 pins) or the MAF sensor (Also 5 pins.)

Unfortunately, at my local junkyard, every single van has either hag the engine removed, or the harnesses cut out of them, so there is no way for me to tell this information outside of asking, here.

So, my question is, is the harness for the EGR solenoid and MAF sensor (Inline on the intake duct) a sub-harness that connects to the main, and not two branches that stems from the main? Is there anything else this sub-harness connects to?

Thanks!

 

 

Completely irrelevant and unhelpful, frankly a waste of my time.

What I need is, someone to walk out to their express, trace the wires from their MAF or EGR to their harness, and see if there is a connector there. Takes 3-5 minutes and would help me immensely.

Thanks.

 

well that's your opinion.
I won't waste any more of your time from now on.