Hello
#21
GatorHawk24, thanks for the towing setup suggestions! This might sound dumb but I saw that brake controller before, probably the same post, and I love the look of it. I should be more concerned about function, but it looks great on the dash and I love that placement right under the tow/haul mode button.
#22
So did you end up using existing wires or putting in a new run?
#24
I put in a new run from the rear door to the front of the van using the wire that came with my camera. It is a single wire that carries the video and power. I was worried about a few wires in the back causing feedback, but I could not see any when I tested it while using all my different lights and accessories. I have not tested it since I finished the run, but at least I will know where to look for any interference that could show up. I did hook up the aftermarket harness and test that reverse wire I previously mentioned and the good news is that it is putting out 12v when the van is shifted into reverse
I also tested the aftermarket trim kit and it looks pretty good in the dash. It looks like I may need to modify the rear support area to get the top of the stereo to dop far enough into the dash. Like I said before I will create a new thread once I get it all figured out.
#25
#26
Here is my current attempt to solve my rear storage issue
They can collapse and fit inside of each other to get them out of the way if I need to. I really like the black ones, but the gray ones are garbage and broke when I was trying to snap them together.
They can collapse and fit inside of each other to get them out of the way if I need to. I really like the black ones, but the gray ones are garbage and broke when I was trying to snap them together.