Hello forum thanks for the add !! I bought a 1988 Chevy g20 starlight conversion. Van 92k miles 350 4speed auto it's missing the rear bed/bench and one swivle I plan on building a two bench / table/bed in its place I want. To lower it 4 inch's with a spindle and spring kit from DJM for a 1985 c10 for the front then do the axle flip kit and drop shackles netting 4inch front 5inch rear I plan on using the stock wheels and tires sizes has any one done this from what I understand rotor thickness determined spindle size either 1" or HD 1.25" I want air ride but can't afford it any one have any better ideas other then chopping springs and hacking the rear any one else think side pipes need to make a comeback on vans ? Thanks for any advice j
keep on vannin
The ol' pig

 

I doubt those tires will fit up in the wheel wells. Vans have lousy clearance for turning.