General Tech Good at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.
Sponsored by:
Sponsored by: CARiD

08 Suburban remote start not working

Thread Tools
 
Search this Thread
 
Old May 18, 2018 | 12:35 AM
  #1  
Zachrritter's Avatar
Thread Starter
CF Beginner
 
Joined: Jan 2018
Posts: 2
Likes: 0
Default 08 Suburban remote start not working

So it was unfortunately something I forgot to test before leaving the dealer and they’ve given us a hard time on even looking for the issue. I have no service lights on, all door and windows closed and have followed proper procedures on using the function. Tried relearning the remote, toggling remote start off and on. When I hold the button, the lights flash and I hear a clicking sound from under the hood. Have had no issues with the car other than oil pressure being low and an oil change fixed that. Any ideas? I only have one remote, however the dealership said they tried another remote and nothing. Thanks!

Zach
Reply
Old Jun 27, 2018 | 3:18 PM
  #2  
jholslin's Avatar
CF Beginner
 
Joined: Jun 2017
Posts: 19
Likes: 0
Default

I would replace the oil pressure sending unit. that may be your oil pressure reading issue and My 06 would not remote start when My Oil pressure sending unit went out. (twice)
Reply




All times are GMT -5. The time now is 2:56 AM.