Chevrolet Forum - Chevy Enthusiasts Forums

General Tech Good at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.
Sponsored by:
Sponsored by: CARiD

Ecm

Thread Tools
 
Search this Thread
 
Old May 28, 2016 | 2:23 PM
Share
  #1  
stevecast34's Avatar
stevecast34
Thread Starter
CF Beginner
 
Joined: May 2016
Posts: 3
Likes: 0
Default Ecm
My ECM fuse keeps blowing in my fuse box on my 2001 chevy venture. Does anybody know what the problem could possibly be. My car won't start because of it
Last edited by stevecast34; May 28, 2016 at 2:32 PM.
Reply
0
Old May 28, 2016 | 2:36 PM
Share
  #2  
tech2's Avatar
tech2
Super Moderator
 
Joined: Mar 2011
Posts: 9,175
Likes: 521
Default
there are 4 pcm/ecm fuses. which fuse panel and what fuse amp rating?
Reply
0
Old May 28, 2016 | 2:40 PM
Share
  #3  
stevecast34's Avatar
stevecast34
Thread Starter
CF Beginner
 
Joined: May 2016
Posts: 3
Likes: 0
Default
Originally Posted by tech2
there are 4 pcm/ecm fuses. which fuse panel and what fuse amp rating?
It's the fuse box under the hood, it's on the left side #33, and it's a 10amp
Reply
0
Old May 28, 2016 | 2:44 PM
Share
  #4  
tech2's Avatar
tech2
Super Moderator
 
Joined: Mar 2011
Posts: 9,175
Likes: 521
Default
if the fuse blows as soon as a new one is installed, find the pcm and unplug the c1 connector....install a new fuse and see if it blows right away.
Reply
0
Old Jun 4, 2016 | 1:21 PM
Share
  #5  
stevecast34's Avatar
stevecast34
Thread Starter
CF Beginner
 
Joined: May 2016
Posts: 3
Likes: 0
Default
Where is the C1 connector located on the PCM?
Reply
0
Back to Subforum
General Tech
View Next Unread
Help solve overheating issue




Advanced Search

All times are GMT -5. The time now is 10:00 PM.