Notices
General Tech Good at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.

help with tans that will fit with a 250 slant 6

Thread Tools
 
Search this Thread
 
Old May 11th, 2009, 6:49 PM
  #11  
CF Veteran
 
Gwampa's Avatar
 
Join Date: Nov 2008
Location: Albuquerque, NM
Posts: 1,017
Likes: 0
Received 0 Likes on 0 Posts
Default

You guys give the kid some room. I've seen some damn hot 6's back in the day. Those 292 and 301 GMC's can still burn up the track (if you can find one). Why not try one or a hopped-up 235 even?
Old May 12th, 2009, 5:20 PM
  #12  
CF Beginner
Thread Starter
 
camchev's Avatar
 
Join Date: May 2009
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks well i have a 235 in mine right now. it also runs and sound really pretty good. it also is in good shape for sitting in a field for 2 years. i dont have the money to hop it up at this point but i have some really big plans for it.
Old May 12th, 2009, 5:54 PM
  #13  
Super Moderator
 
therewolf's Avatar
 
Join Date: May 2008
Posts: 2,474
Received 20 Likes on 19 Posts
Default

If they're set up right, they'll crush ya with the torque off the line. When the Mustangs first came out in '64, all you could get was a straight six, but they were killin' people from light to light on the street.
Old May 12th, 2009, 9:46 PM
  #14  
CF Veteran
 
old dog's Avatar
 
Join Date: Dec 2007
Location:
Posts: 1,019
Likes: 0
Received 0 Likes on 0 Posts
Default six popper

my ole man got three 235's with fenten header's over drive's one has a 4 barrel 4360 holly carb and they wont die .one is in a 1960 el cameno and it's got a three speed overdrive 4:11 gears and a flat tappet dirt track cam in it and with the lash on the valve's set tight it rock's and roll's . i drove it to work one day and the school kid would listen to it and say " i never heard a v-8 sound like that before ".
Old May 12th, 2009, 10:13 PM
  #15  
CF Veteran
 
old dog's Avatar
 
Join Date: Dec 2007
Location:
Posts: 1,019
Likes: 0
Received 0 Likes on 0 Posts
Default trans parts

if all you need is transmission part's try hemmings motor news they are on the net just search around hear's one you can try http://www.chevsofthe40s.com/search....t=car&Cat=150C
Old May 13th, 2009, 7:51 AM
  #16  
CF Beginner
Thread Starter
 
camchev's Avatar
 
Join Date: May 2009
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

well ya i only need a trany my engine is still really good. so thanks and if you find some more sites or anything just tell me. thanks again for all your help.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ltayllt
Tahoe & Suburban
2
February 9th, 2017 9:09 AM
Parhnoied
Silverado, Sierra & Fullsize Pick-ups
4
April 24th, 2010 9:21 AM
tom5170
Silverado, Sierra & Fullsize Pick-ups
21
March 15th, 2010 8:06 PM



Quick Reply: help with tans that will fit with a 250 slant 6



All times are GMT -5. The time now is 5:21 AM.