Parts suggestion for 350 Build
October 17th, 2019, 7:29 PM
#1
CF Beginner
Thread Starter
Join Date: Oct 2019
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Parts suggestion for 350 Build
Let me start by saying this is my first engine swap and I'm very new to working on engines
I recently bought a parts truck with a 350 sbc from a late 80's Camaro in hopes of putting it in my 93 Sierra
My truck is used mostly for hauling and cruising so i would like to get a little more low end power out of the motor.
I want to replace the intake/carb along with a bigger more aggressive sounding cam i also have a set of Sportsman II heads and was wondering if there is any point in using them on a street motor?
Looking for part suggestions and advice
Also willing to replace lifters and rockers to accommodate a new cam
This is my first post so please let me know if you need anymore information
Thanks in advance
I recently bought a parts truck with a 350 sbc from a late 80's Camaro in hopes of putting it in my 93 Sierra
My truck is used mostly for hauling and cruising so i would like to get a little more low end power out of the motor.
I want to replace the intake/carb along with a bigger more aggressive sounding cam i also have a set of Sportsman II heads and was wondering if there is any point in using them on a street motor?
Looking for part suggestions and advice
Also willing to replace lifters and rockers to accommodate a new cam
This is my first post so please let me know if you need anymore information
Thanks in advance
Thread
Thread Starter
Forum
Replies
Last Post