Chevrolet Forum - Chevy Enthusiasts Forums

General Tech Good at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.
Sponsored by:
Sponsored by: CARiD

Piston issue

   
Old Jun 12, 2019 | 10:34 AM
Share
  #1  
Bostonredneck's Avatar
Bostonredneck
Thread Starter
CF Beginner
 
Joined: Jun 2019
Posts: 2
Likes: 0
Default Piston issue

I am currently rebuilding a 350 and after a few different sets of piston rings I finally got the right ones or so I thought. The Pistons fit in the cylinder but doesn't move freely it is very tight and won't move not sure what the reason is I have never had this happen before I am at my wit's end does anyone have any insight
Last edited by Bostonredneck; Jun 12, 2019 at 10:36 AM.
Reply
0
Old Jun 12, 2019 | 12:03 PM
Share
  #2  
kevinkpk's Avatar
kevinkpk
CF Monarch
10 Year Member
Liked
 
Joined: Jul 2011
Posts: 5,920
Likes: 140
From: kevinkpk
Default
You need to check the ring end gap with a feeler gauge. I don't know what is acceptable, but guessing .02-.03"
Reply
0
Old Jun 12, 2019 | 12:37 PM
Share
  #3  
Bostonredneck's Avatar
Bostonredneck
Thread Starter
CF Beginner
 
Joined: Jun 2019
Posts: 2
Likes: 0
Default
Gap is good
Reply
0
Old Jun 12, 2019 | 12:50 PM
Share
  #4  
kevinkpk's Avatar
kevinkpk
CF Monarch
10 Year Member
Liked
 
Joined: Jul 2011
Posts: 5,920
Likes: 140
From: kevinkpk
Default
Oil it up, and slap it together
Reply
1
Back to Subforum
General Tech
View Next Unread
98 K2500 Burb with 454 Smog Delete


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 2:30 AM.