Potential engine swap
Thread Starter
CF Beginner
Joined: Apr 2011
Posts: 5
Likes: 0
Potential engine swap
My son lost the engine in his '97 1500 and it has a totally rebuilt 4L60E in it.
We have a still very good running 1995 Suburban with a 350 and rusty frame (a few non factory holes in it) with a bad tranny.
I am wondering is it possible to do the swap and not worry about trans bolting up or sensors going from a OBD I engine to a OBD II computer diagnostic system.
We are planning to freshen up the Vortec heads and swap them over so that all the top end bolts up.
Thanks in advance!
We have a still very good running 1995 Suburban with a 350 and rusty frame (a few non factory holes in it) with a bad tranny.
I am wondering is it possible to do the swap and not worry about trans bolting up or sensors going from a OBD I engine to a OBD II computer diagnostic system.
We are planning to freshen up the Vortec heads and swap them over so that all the top end bolts up.
Thanks in advance!
Thread
Thread Starter
Forum
Replies
Last Post
Rich m
Chevelle & El Camino
0
Jul 3, 2020 11:14 AM
Ianmac
1988 - 1998 (GMT400)
21
Mar 22, 2020 11:34 AM
