Steering for 1984 4wd
Thread Starter
CF Beginner
Joined: Mar 2018
Posts: 2
Likes: 0
Steering for 1984 4wd
Hello, 1st tine on here so I hope I have this right. I have a 1984 k10 Chevy truck. I have replaced the power steering pump, steering gear box, lines and pitman arm and rod ends and still can't get this truck to turn like it should. Its like i have no power steering. Any info on this problem would be more than appreciated.
Thanks to anyone who can help, Homer.D
Thanks to anyone who can help, Homer.D
Super Moderator
Joined: Mar 2011
Posts: 9,175
Likes: 521
other things that effect the power steering assist
#1 severely underinflated tires
#2 seized ball joints, steering shaft ujoints or steering linkage- jack both front wheels off the ground...engine off and turn the steering wheel...it should turn smoothly and easily.
#3 loose p/s belt
#1 severely underinflated tires
#2 seized ball joints, steering shaft ujoints or steering linkage- jack both front wheels off the ground...engine off and turn the steering wheel...it should turn smoothly and easily.
#3 loose p/s belt
Thread Starter
CF Beginner
Joined: Mar 2018
Posts: 2
Likes: 0
other things that effect the power steering assist
#1 severely underinflated tires
#2 seized ball joints, steering shaft ujoints or steering linkage- jack both front wheels off the ground...engine off and turn the steering wheel...it should turn smoothly and easily.
#3 loose p/s belt
#1 severely underinflated tires
#2 seized ball joints, steering shaft ujoints or steering linkage- jack both front wheels off the ground...engine off and turn the steering wheel...it should turn smoothly and easily.
#3 loose p/s belt
