When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
General TechGood at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.
I have a 305 HO I’m putting into a Nissan hardbody. But when I took the heads off to assure the engine is in good shape I found some scaring on the top of one piston. All others are perfect and all side walls look good. So could I jsut leave it alone ? Or maybe sand the tap of the piston down so it’s not as rough?
Stock 305ho
