Notices
General Tech Good at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.

Tranny shift sensors

Thread Tools
 
Search this Thread
 
Old November 4th, 2018, 11:46 AM
  #1  
CF Beginner
Thread Starter
 
bastage's Avatar
 
Join Date: Oct 2016
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Tranny shift sensors

I have a ‘03 Silverado 1500 2wd. Lost 4th gear and CEL illuminated. PCM threw three codes: P0753and P0758and P0756. I replaced shift sensors 1-2 and 3-4. Worked great for exactly 7 days. Yesterday I felt a miss going into 2nd gear then I lost 4th gear again. Symptoms are now much worse than b4. Very sluggish start and no 4 th gear. I also. Noticed too much tranny fluid when I initially checked and siphoned about a pint out. Seemed to help, but symptoms persisted. Is my tranny about to go or should I change the up shift Sensors as well?




All times are GMT -5. The time now is 7:33 PM.