I am in the midst of transplanting a 2007 Impala SS steering wheel and column into my 1955 Chevy truck and need assistance with the pin out of the connectors (ignition, radio, turn signals, wipers, horn, etc). I have determined that the yellow connector is for the (non-existent) air bags, so I don't need that one. But I need the pins out for the other two (middle right and bottom left in link picture below).

http://www.burrtech.net/truck/images...Connectors.jpg


Any assistance would be greatly appreciated,

-Mike

 

Can't help with the pins, but your steering wheel/column install has me wanting to see some pics when you get through. Sounds real classy.

 

thanks for the comment. Ironically, as you are in Albq, the truck is in Santa Fe at Mena's Coachworks. (www.menascoachworks.com) and the progress can be viewed at www.burrtech.net/truck

cheers,
-Mike

 

Mike:
Damn, totally blown away by your truck. Have always felt that the 5 window rigs were going to be much more than classic......and yours is. Your shop team guys are obviously pro's too. I'll visit the link from time to time to see the progress. Probably be nominated for ride of the month sometime soon on the forum. Thanks for the insight and take care overseas.